 printable version
The oil pump petrol engines of 2.4 and 2.8 liters
Remove the timing belt.
| Fig. 6.26. Elements of crankshaft pulley 1 - the toothed belt pulley of the crankshaft; 2 - remote bush; 3 - a bolt
|
Remove the spacer sleeve 2 and 1 toothed belt pulley. Remove the upper section of the oil pan
| Fig. 6.27. Location idle bolts (3) and the tensioning (1) clips, bolts (5) and lever (4) a tightening mechanism, and a valve (2) of the injector
|
Remove the bolts idle 3 (Fig. 6.27) and the tensioning rollers 1, 5 and tensioner arm 4. Disconnect the electrical connector from the oil temperature sensor.
| Fig. 6.28. Location bolts of the oil pump
|
Remove the bolts and remove the oil pump from the front of the engine (Fig. 6.28).
| 
