REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Audi A6 (1997 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Audi
	A6
		General Information
		Operation of the vehicle
		Maintenance
		Engines
		Ignition, fuel injection and exhaust of gasoline engines
		The power supply system, and preheating the exhaust gases of diesel engines
		Lubrication System
		Cooling system
		Coupling
		Transmission
		The front wheel drive shafts
		Design features four-wheel drive transmission
		Suspension
		Wheels and tires
		Steering
			Overview
			Steering wheel with airbag
			Steering column
			Steering gear
			Tie rod end
			Power steering pump car with four petrol and diesel engines
				Withdrawal
				Setting
			Power steering pump car with six-cylinder diesel engines
			Power steering pump car with six-cylinder petrol engines
			The corners of the front axle
		Brakes
		Body
		Heating and air conditioning
		Electrical
		Electric schemes

printable version

Setting

Installation is made in sequence, return to removal.

Before installing the pump, fill it with fresh liquid G 002,000.

Tighten the pump torque of 20 Nm.

When set to be replaced by new O-rings and clamps.

Fig. 14.27. Fixing the suction (1) and pressure (2) hoses to the power steering pump

Install the suction hose 1 (see. Fig. 14.27), and the P mark on the hose should be the part of the pump assembly seam (arrow in Fig. 14.27).

Add fluid to the hydraulic system of the power steering and bleed the air.

Check the hydraulic system of the power steering for leaks.

Connect a wire of "weight" to the battery.

Turn on the radio and enter the code.

Lift up the power window glass until it stops. Then press all the switches window again, at least 1, in the closed position of the control unit to activate windows.

Set the clock.

« previos page
Withdrawal

next page »
Power steering pump car with six-cylinder diesel engines