Changing wheels

Remove the wheel covers.

On the car standing on the ground, apply the parking brake and release the wheel bolts.

Pick the appropriate side of the car and fix on supports.

Alloy wheels protected against corrosion by a transparent varnish. Be careful not to damage the paint. If the coating is damaged disc cover layer of varnish.

To eliminate the "kick is" drive wheel to the hub before installing the wheel, apply a thin layer of grease on the collar of the hub centering disc.

Galvanized wheel bolts can be used only for steel stamped disks.

Discs of aluminum and magnesium alloys fasten only the chromeplated screws with a conical rotating washer installed under the bolt head. It protects the disk surface at a tightening of bolts.

Before wrapping do not grease the threads of bolts fastening wheel.

Tighten the wheel bolts evenly in several steps in one.

Tightening torque of wheel bolts 120 Nm.