 printable version
Setting
Installation is made in sequence, return to removal, taking into account the following. Clean the gasket surfaces of the cover and the water pump housing. Replace the O-ring and gasket.
| Fig. 7.24. The water pump and the thermostat cars with petrol engines of 1.8 l 1 - a bolt, M6-10 Nm, M8-20 Nm; 2 - the bottom casing of a gear belt; 3 - nut 10 Nm; 4 - the water pump; 5 - a lining; 6 - a sealing ring; 7 - a bolt; 8 - the thermostat; 9 - connecting pipe; 10 - drain plug, 30 Nm; 11 - a sealing ring; 12 - a pulley; 13 - bolt 25 Nm
|
Insert screw 7 (see. Fig. 7.24) in the holes of the water pump.
| Fig. 7.27. The location and sequence of tightening of bolts (1-6) bracket of the generator, power steering pump and fan
|
Establish an arm of the generator, power steering pump and fan on the block of cylinders and fix bolts, having tightened their moment of 25 Nm in the sequence shown in Fig. 7.27. Install poly V-belt. Install the fan with viscous coupling. Fill in cooling liquid. Connect a wire of "weight" to the battery. Turn on the radio and enter the code. Lift up the power window glass until it stops. Then click on all window switches again for at least 1, in the closed position of the control unit to activate windows. Set the clock.
| 
