 printable version
The correct position of the elements of the exhaust system
Inserting the exhaust system when the engine is cold produce. Loosen the bolts clamps.
| Fig. 4.38. The correct position of the right rear suspension and central silencing: a = 5-9 mm
|
Move forward exhaust system so that the right rear suspension was loaded muffler (Fig. 4.38). Arrow directed ahead of the vehicle. Tighten the clamps to 40 Nm.
| Fig. 4.39. Fitting measuring the distance between the exhaust pipe of the muffler (1) and the rear bumper (2): a = 40 mm.
|
The distance between the exhaust silencer and the rear bumper in a free state should be 40 mm (Fig. 4.39). On cars with a compound of the central and rear muffler clamp must also expose the central muffler. Loosen the bolts of the central muffler pipe clamps. Move forward exhaust system so that the suspension of the right of the central silencer has been shifted by 5-9 mm (see. Fig. 4.38). Tighten the clamps to 40 Nm.
| Fig. 4.40. The correct position of the rear muffler suspension: a = 12 mm
|
Move the rear muffler forward enough to offset the suspension of the muffler was 12 mm, and fix it in position by tightening the bolts clamps to 40 N ?� m (Fig. 4.40). Arrow directed ahead of the vehicle.
| 
