 printable version
Torques Nm
The drive shaft leading to the transmission flange: M8 bolts 40 M10 bolts 70 ABS sensor to the steering knuckle 10
| Fig. 10.1. Drive shaft with ball joint: 1 - a lock ring; 2 - a lining; 3 - the internal hinge of equal angular speeds; 4 - the drive shaft; 5 - a collar; 6 - a protective cover; 7 - a collar; 8 - Belleville washer; 9 - thrust washer; 10 - a lock ring; 11 - the external hinge of equal angular speeds; 12 - bolt M14-115 Nm and tighten on 180 ?�, M16-190 Nm tighten and 180 ?�; 13 - a bolt, M8h48-40 Nm M10h48-70 Nm; 14 - a lining; 15 - a protective cover
|
| Fig. 10.2. Drive shaft with the hinge type "tripoid": 1 - a washer; 2 - thrust ring; 3 - snap ring; 4 - the external hinge of equal angular speeds; 5 - bolt M16-190 Nm tighten and 180 ?�; 6, 11 - protective covers; 7, 9, 10, 12 - a collar; 8 - the drive shaft; 13 - a cover; 14 - a sealing ring; 15 - a lock ring; 16 - holder of the hinge; 17 - video; 18 - a bolt M10x20 70 Nm; 19 - joint housing
|
NOTE When assembling it is necessary to use new snap rings 1, 10 (Fig. 10.1). Belleville washer 8 is installed with the concave side to the thrust washer 9. In the presence of abrasions and cracks need to replace protective covers 6 and 15. |
NOTE The concave side of the washer 2 (Fig. 10.2) must conform to the thrust ring. When assembling the need to replace a spring ring 3. Before installing SHRUS it is set in the groove of the drive shaft. In the presence of abrasions and cracks need to replace the protective cover. The chamfer on the slots of the rollers to be directed towards the drive shaft. |
|
