printable version
Removing and installing clutch pedal
The clutch pedal is removed to replace the plastic bushings the axis of the sleeve and the plug pin pusher master cylinder when a clutch squeak, jamming or increased backlash, and a return spring for replacement if damaged. You will need: two keys "15" pliers. | | 1. Disconnect the clutch pedal pusher of the main cylinder drive clutch. For this purpose pliers, remove the retainer pin plug pusher ... | 2. ... and remove the pin from the plug hole and the pedals. |
3. Hold the key b axis of rotation of the pedals, turn the key and the axle nut. | | 4. Remove the axle from the holes of the pedal bracket and ... | 5. ... and remove the pedal, moving the pedal arm slot and out of engagement with spring return |
b. 6. If necessary, remove the return spring, moving it bent ends of the holes in the bracket. | | 7. Remove the pedal pin sleeve ... | 8. ... and two sleeve axis. |
9. Install the parts in reverse order of removal.
A WARNING When installing the clutch pedal Ensure that the groove as well (see. Photo n. 5) pedal arm engages the return spring used. |
|