add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Chevrolet Lanos (since 2004 of release), Daewoo Lanos (since 1997 of release)

general info. full specifications. diagnostics. hints. tips. tricks
Chevrolet Lanos
Home
 
Chevrolet
Lanos
Device Car
Operating Guidelines
Faults in the way
The engine will not start
Fault injection system
Missing idling
Misfire
Diagnosis of engine appearance of spark plugs
The car moves jerkily
The car is badly dispersed
The engine has decayed during movement
Oil pressure dropped
Engine overheating
The battery is not recharged
Start the engine from the external power sources
Electrical Faults
There were extraneous knocks
Problems with brakes
Bleeding brake system
Check the brake system
Puncture
Maintenance
Engine
Transmission
Chassis
A steering
The brake system
Electrical
Body
Wheels and tires
Purchase of spare parts
A trip to the STO
Winter car operation
Preparation for technical inspection
Tips novice mechanic
Applications
Diagrams
 


Hit Counter by Digits


print page printable version

Problems with brakes






The brake system of your vehicle is equipped with a vacuum booster and quite effective. Reduced effectiveness of the braking, skidding when braking should be a signal for emergency brake testing.

A WARNING
Regularly check the brake fluid level in the master cylinder reservoir. The brake fluid level should be about a label ?�MAX?� on the body of the tank.

Fluid level indicates a leak of brake fluid from the system, or excessive wear on the brake pads. If the dash lit the lamp indicating a low level of brake fluid, take the time to add it immediately, first check the thickness of the brake linings may be that the time has come to replace the pads?
Car manufacturers recommend that after 30 000 km or 3 years (whichever comes first) change all brake fluid in the system.
Some drivers ignore this advice because the liquid in the tank it seems pretty clear, and it is in vain. The fact that the brake fluid is very hygroscopic: it absorbs moisture from the air which is eventually not only destroys the surface of the brake cylinders, pipelines, and as a consequence, leads to premature failure of the units braking system, but also greatly reduces the boiling point of brake fluid . The normal boiling point of the brake fluid class DOT-4-210-260 ?� C. With frequent heavy braking disc brakes are very hot, and at high water content of the brake fluid can boil that usually leads to failure of brakes.

HELPFUL ADVICE
In order not to expose themselves to future unforeseen repair expenses, not only the braking system, but the whole car, it is better to replace the liquid in a timely manner in the brake system.
We recommend replacing the brake fluid 2 years.

If you have problems with the brakes, bleed the brake system (see. "Bleeding brake system"). If this does not give the desired result, you must carefully check the entire brake system, as described below (see. "Check braking system").




« previos page
Possible causes of vibration and shock on the steering wheel and their solutions
next page »
Bleeding brake system

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.