 printable version
Management heater and ventilation system (optional)
Mode switch fan
| Fig. 1.111. The control panel a heater and ventilation system: 1 - selector switch air intake; 2 - the switch of the air conditioner; 3 - selector switch ventilation; 4 - mode selector to the speed of the fan; 5 - air temperature adjustment switch
|
The fan runs only when the ignition key is in the ?�ON?� (Fig. 1.112). This switch is used to enable or disable the fan speed selection and its rotation. The fan speed and hence the size of the air stream from the ventilation system can be changed manually by turning this switch. When turning to the right increases the value of the air flow, while turning to the left - decreases. To turn off the fan set the switch to "0".
Mode Button Air Intake
This switch is used to change modes of ventilation between the outside air intake mode and recirculation mode. To change the ventilation mode (external air intake mode, recirculation mode), press this button (Fig. 1.113). Outside air intake mode  : Indicator lamp on the button illuminates when the mode is set to external air. Recirculated air  : Indicator lamp on the button illuminates when the recirculated air mode is set. In the external air (?�FRESH?�) into the vehicle enters the outer air heated or cooled depending on the selection of other functions. The recirculated air mode (?�RECIRCULATION?�) recirculated air inside the vehicle and its heating or cooling depending on the choice of other functions.
NOTE Using the recirculation for a long time can cause fogging of the windscreen and side windows and the air inside the vehicle will be too dry and stale. Prolonged use of the air conditioner in recirculation mode the air inside the vehicle will also become too dry. |
Switch the mode of ventilation
This switch is used to select the direction of the air flow to the feet, through the vents in the cabin or to the windscreen (Fig. 1.115). To identify modes of ventilation (in the head, in the legs / in the head, in the legs, in the legs / heating vents to the windscreen and side windows, vents to the heated windscreen and side windows) are five characters. "In the region of the head" Air flow through the vents enters the upper part of the passenger compartment (Fig. 1.115). "In the area of feet / in the head"
| Fig. 1.116. Supply ventilation in the head and legs
|
Air enters through the vents in the upper part of the passenger compartment and in the legs (Fig. 1.116). This allows you to warm air fed through deflectors to the feet, and unheated or poorly heated air - through the vents in the upper part of the passenger compartment. "In the area of the feet"
"In the area of feet / heating vents to the windscreen and side windows"
| Fig. 1.118. Submission to the feet ventilation / heating vents to the windscreen and side windows
|
Air is supplied through the air vents of the windscreen, side windows and to the feet (Fig. 1.118). When you select (to toe / heating vents to the windscreen and side windows) is automatically activated and installed air-conditioning outside air intake mode (?�FRESH?�). "By the vents heated windscreen and side windows"
| Fig. 1.119. Submission to the ventilation vents heated windscreen and side windows
|
Air is supplied through the vents windscreen and side windows (Fig. 1.119). When this mode is automatically turned on and the air conditioner installed outside air intake mode (?�FRESH?�).
Air temperature adjustment knob
This knob is used to turn on and turn off the heater and select the desired temperature (Fig. 1.120).
| 
