REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Spectra (2004 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Spectra
		Device Car
		Operating Guidelines
		Faults in the way
		Maintenance
		Engine
		Transmission
		Chassis
		A steering
		The brake system
			Design Features
			Possible malfunctions of the brake system, their causes and remedies
			Bleeding brake system hydraulic drive
			The main brake cylinder
			Vacuum brake booster
			Replacement of hoses and tubes hydraulic brakes
				Replacement brake hoses
				Replacing the brake pipes
			Front brake
			Rear brake
			Parking brake
		Electrical
		Body
		Car Care
		Purchase of spare parts
		A trip to the STO
		Winter car operation
		Preparation for technical inspection
		Applications
		Diagrams

printable version

Replacing the brake pipes

The pipe with all nodes and brake hoses and replacing them with the same principles. All nuts tubes made turnkey "to 10".

The works shown in the example of a tube connecting the rear brake hose to slave cylinder rear brake.

HELPFUL ADVICE

To loosen the nuts pipes use special keys: as much tightened nuts and usually corroded, when using a conventional key facets nuts rumpled.


1. Loosen the nut of the tube to the rear brake cylinder.	2. Remove the nut of the tube to the rear brake hose and remove the tube.

NOTE

To prevent leakage of fluid from the complete hydraulic drive immediately stop the opening of a brake hose in any way possible. It is well suited for this purpose, the protective caps valve to release the air.

3. Install the new tube in the reverse order of removal.

4. After replacing the tubing, remove the air from the brake system (see. "Bleeding brake system hydraulic drive").

« previos page
Replacement brake hoses

next page »
Front brake