REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Spectra (2004 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Spectra
		Device Car
		Operating Guidelines
		Faults in the way
		Maintenance
		Engine
		Transmission
		Chassis
		A steering
		The brake system
		Electrical
			Design Features
			Fault diagnosis onboard electric equipment
			Mounting blocks
			Accumulator battery
			Generator
				Design Features
				Possible malfunctions of the generator, their causes and remedies
				Replacing the alternator drive belt and water pump
				Removing and installing the generator
				Repair the generator
			Starter
			The switch (lock) of ignition
			Ignition system
			The engine management system
			Lighting, light and sound alarm
			Windscreen wiper
			Removing and installing windshield washer
			Removal and installation of the fan motor cooling radiator
			Fan heater
			Rear window
			Removing and installing cigarette lighter holder
			Device combination
			Replacing control lamps and instrument lighting
			Replacing control unit exterior rear-view mirrors and headlamp controller electroproof
			Replacing the instrument panel switches
			Replacing the backlight switches dashboard
			Refitting hours
			Removal and installation of the block ETWIS
			Car audio system
			Replacement sensors and switches
			Anti-theft immobilizer system
		Body
		Car Care
		Purchase of spare parts
		A trip to the STO
		Winter car operation
		Preparation for technical inspection
		Applications
		Diagrams

Removing and installing the generator

You will need to face head "14".

1. Disconnect a wire from the plug ?�-?� the storage battery.

3. Disconnect the harness connector from the generator by releasing the lock pads.

4. Remove the tip of the wire nut and disconnect the wire from the output of the generator.


5. Remove the alternator drive belt and the water pump (see. "Replacing the alternator drive belt and a water pump").	6. Remove the bolt of the generator to a tension lath.

7. Remove the screw fastening of the generator to an arm of the engine and remove the generator.

8. Place the generator in the reverse order of removal.

9. Adjust the tension of the alternator drive belt and the water pump (see. "Check and adjust belt drive generator and water pump").