 printable version
Jacking
When using the jack on soft ground under the foundation puts the jack timber or board. Jack attached to the vehicle, is in the trunk. To get it, fold-up upholstery floor. The jack is secured in the bracket panel trunk ... ... and his arm - in holders on the floor panel of the trunk. Bag with a key for the wheel nuts and combined screwdriver placed in a niche under the trunk floor panel plastic upholstery. | | 1. To use the jack slightly compress it by rotating the spindle counterclockwise ... | 2. ... and remove the jack from the bracket. |
NOTE At the back of the jack installation unclench its bracket, or while driving, he will move into the niche and publish knock. |
| | 3. Overcoming the resistance of the two clamps, remove the jack handle from the trunk. | 4. Set the jack under the threshold of the body so ... |
| 5. ... to the edge threshold housed in the groove of the jack head and the head itself was located under a special slot at the threshold between the two notches in its edge near each wheel. |
WARNINGS Before I turn the wheel lifting gear, brake the car a lay brake and put it under the wheel stops on the opposite side. Do not work under a vehicle raised on a jack, but if it is absolutely necessary, set a strong and stable axle support. |
|
