 printable version
Removing and installing mounting block
You will need: the key "10", face head, "7", a flat-blade screwdriver. Removing the mounting fuse box located in the passenger compartment, using the following procedure. 1. Disconnect a wire from the plug ?�-?� the storage battery. |
| | 4. Remove the two nuts ... | 5. ... and remove the fuse box assembly from the bracket and block ETWIS. |
| | 6. Press the screwdriver tabs ... | 7. ... and disconnect the unit from the mounting bracket. |
| 8. Make a note of the location of the wires to connect when installing them on the same place, and disconnect the wires from the fuse box mounting. |
9. Install the parts in reverse order of removal. |
To remove the mounting block of additional relays located in the passenger compartment, perform the following steps. 1. Disconnect a wire from the plug ?�-?� the storage battery. |
| | 4. Remove the nut ... | ... 5. Take mounting block and remove it by removing the pads from the relay or relay harness from the mounting block. |
6. Install the parts in reverse order of removal. |
Removing mounting block relays and fuses located in the engine compartment, performed as follows. 1. Disconnect a wire from the plug ?�-?� the storage battery. |
| | 2. Click on the clip ... | 3. ... and remove the mounting block. |
| | 4. Remove the nut ... | 5. ... also remove the wire from the pin. |
| | 6. Press the lock and bring the mounting bracket from the unit. | 7. Remove the bolt ... |
| 8. ... and disconnect the unit from the mounting block harness. |
9. Similarly disconnect the remaining pads. |
| | 10. Press a screwdriver and remove the lock from the mounting block small block harness. | 11. Pull the wiring harness to the side ... |
| 12. ... and depressing the latches, remove the bracket assembly block of relays and fuses. |
13. Install the parts in reverse order of removal. |
|
