 printable version
Removing and installing wiper drive
You will need: the key "12" face head "12", a screwdriver with a flat blade and Phillips. | | 2. Remove the protective cap. | 3. Remove the nut ... |
| 4. ... and remove the wiper arm. |
5. Similarly, remove the second wiper arm. |
NOTE The left and right wiper arms are not interchangeable, do not mix them at installation sites. |
| | 6. Remove the lock pistons ... | 7. ... and remove the cap. |
| | 8. Lower the bonnet and, having hooked a screw-driver ... | 9. ... remove the plastic cap. |
10. Similarly remove three plugs. |
| | 11. Remove the four screws that secure the ... | 12. ... open the hood and remove the left side lining Windscreen. |
| | 13. Use a screwdriver as a lever ... | 14. ... disconnect from the crank gear motor traction drive wiper. |
| | 15. Remove the two nuts securing the left wiper drive. | 16. Similarly, unscrew the two screws securing the left ... |
| 17. ... and remove the wiper drive with the car. |
18. Install the parts in reverse order of removal. |
|
