REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Spectra (2004 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Spectra
		Device Car
		Operating Guidelines
		Faults in the way
		Maintenance
		Engine
			Design Features
			Possible engine malfunction, their causes and remedies
			Useful tips
			Compression check in cylinders
			Removal and installation of decorative engine cover
			Removal and installation of mudguards of the engine
			Mount Replacement power unit
			Replacement of a protective timber
			Installation of the piston of the first cylinder to TDC of the compression stroke
			Replacing the timing belt
			Replacing the support rollers and tensioning the timing belt
			Removing, Troubleshooting and installation of a flywheel
			Replacement parts Seal Engine
			The cylinder head of the engine
			Removing and installing engine
			Lubrication system
			Engine cooling system
			Exhaust System Engine
				Design Features
				Replacement cushions suspension exhaust system
				Removing and installing exhaust manifold
				Substitution of the catalyst
				Replacement of the additional muffler
				Substitution of the intermediate tube
				Replacement of the basic muffler
				Removing and installing Thermoscreens and housings
			The power supply system of the engine
		Transmission
		Chassis
		A steering
		The brake system
		Electrical
		Body
		Car Care
		Purchase of spare parts
		A trip to the STO
		Winter car operation
		Preparation for technical inspection
		Applications
		Diagrams

Replacement of the additional muffler

1. Place the vehicle on a pit or hoist.

2. Remove the nuts of the flange of the additional muffler to catalytic converter (see. "Replacement catalytic converter").


3. Remove the nuts of the flange of the additional muffler to the flange of the main silencer.	4. Remove the pins from the silencer. Remove the seal and holding silencer, disconnect the bracket from the pillows ...

5. ... and remove the silencer.

HELPFUL ADVICE

Laying additional silencers at each dismantling of connections, replace with new ones.

6. Install the new silencer in the reverse order of removal.