 printable version
Replacing the parking brake cable
Parking brake cables, replace at their excessive stretching (inability to adjust the handbrake), mechanical damage and loss of mobility in the shell. Replacing the parking brake cable is shown in the example of the left rope, the right rope replaced almost similarly. You will need: a socket wrench "12" pliers. 1. Disconnect a wire from the plug ?�-?� the storage battery. |
| | 4. Remove the retainer fixing the sheath to a brake board. | 5. Remove the two nuts securing the bracket to the cover of a cable arm rear suspension ... |
| | 6. ... one bolt to the body shell of the bracket (for clarity, the fuel tank is removed) ... | 7. ... and remove the cable from a brake board. |
| | 8. Remove the return spring parking brake cable ... | 9. ... remove the locking bracket securing the cable cover in the bracket on the body ... |
| | 10. ... and bring the cable from the bracket on the body. | 11. Print the tip of a cable from the slot in the equalizer and remove the cable from the vehicle. |
12. Similarly remove the right of the parking brake cable. |
13. Install the new cable car in reverse order of removal. |
| 
