add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 3 (2003 release)

general info. full specifications. diagnostics. hints. tips. tricks
Mazda 3
Home
 
Mazda
3
Operation and maintenance of car
eleven Description of vehicle
The dimensions and general appearance of the car
Specifications
Vehicle identification
Engine compartment
Capacities units and systems. Recommended operating materials
Keys, locks of doors, sunroof, anti-theft system
Controls and instrument cluster
Information display
Electronic immobilizer (anti-theft system)
Heater, air conditioning and ventilation system of the car interior
Adjustable vents
The air conditioning system with manual control
Heating mode
Cooling mode
Ventilation mode
Mode blowing windscreen
Dehumidification mode (with the inclusion of the air conditioner)
Automatic climate control
Air recirculation (LED on)
Ventilation mode (LED is off)
Work automatic climate control system
The sensor of solar radiation and temperature sensors
General recommendations for the operation of air conditioner
Lever of lay brake system
Seats
Restraint System
Car use to destination
Troubleshooting arisen in a way or before driving
Tables
Engine
Transmission
Chassis
Steering Gear
Brakes
Onboard electric
Body
 


Hit Counter by Digits


print page printable version

Automatic climate control



Switch ?�AUTO?� (Auto) mode (see. Fig. 1.107).

Appearance control panel, automatic air-conditioning system
Fig. 1.107. Appearance control panel, automatic air-conditioning system: 1 - the switch of the fan speed; 2 - mode switch air distribution; 3 - the switch of blowing the windscreen; 4 - control temperature; 5 - the switch ?�AUTO?� (automatic); 6 -button display the ambient temperature; 7 - mode switch interior ventilation; 8 - the switch of the air conditioner; 9 - the switch ?�OFF?� (off)


Press the switch to ?�AUTO?� (Auto) climate control system carries out the following automatic functions (according to the set temperature of the air inside the vehicle):
- Regulation of the temperature of air supplied to the interior;
- Regulation of the fan speed (the amount of air supplied to the interior);
- Switching the air distribution;
- Switching ventilation and recirculation;
- On and off the air conditioner;
- Switching the air conditioning works, "A / C" or "A / C ECON?�.
An indicator built-in switch button ?�AUTO?�.
This LED indicates that the climate control system operates automatically.
If the built-in light is not on, it means the driver to manually change one or more modes of the climate system (eg, switch the mode of distribution of air, change the fan speed, pulled the circuit breaker or switch the air conditioner blowing the windscreen). The system supports the mode specified by the driver manually. Otherwise, the climate control system continues to operate in automatic mode.

Switch ?�OFF?� (off) (see. Fig. 1.107).
Press the switch to ?�OFF?� climate control system is switched off.

Regulator temperature (Fig. 1.108).

Adjusting the air temperature
Fig. 1.108. Adjusting the air temperature


The air temperature is adjusted by turning the handle: clockwise - increases and counterclockwise - decrease.

Switch fan speed (Fig. 1.109).

Adjusting the fan speed
Fig. 1.109. Adjusting the fan speed


There are seven fan speeds. The selected fan speed is reflected in the information display.

Mode switch air distribution (see. Fig. 1.107).
With the switch, you can select the desired mode of distribution of air.
If enabled and the air temperature is set at the average level in the zone the feet of the driver and passenger enters the warm air and the cooler is sent to the interior through the central and side air vents, located in the Control Panel.

Switch the air conditioner.
If the climate control system operates in automatic mode or turned on the fan, using the "A / C" can be turned on or off the air conditioner (acting as cooling and dehumidification).
The choice between the "A / C" and "A / C ECON?� automatically. In economy mode (A / C ECO) the effectiveness of cooling and condensate removal from the windscreen reduced. However, use of this mode reduces the load on the air conditioning system. Air conditioning may not work if the ambient temperature is close to 0 ?� C (LED stays on, even when the system is off).

Mode switch interior ventilation.
You can select the mode of ventilation or air recirculation mode. Press the switch to select one of two modes of ventilation of salon.




« previos page
Dehumidification mode (with the inclusion of the air conditioner)
next page »
Air recirculation (LED on)

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.