REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 3 (2003 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mazda
	3
		Operation and maintenance of car
		Engine
		Transmission
		Chassis
		Steering Gear
		Brakes
		Onboard electric
		Body
			Overview
			Mounted components of a body
			Glazing Body
			Seats
			Air conditioning and heating
				Refrigerant
				Air filter
				Block the air conditioning system
				Evaporator
				Expansion Valve
				Capacitor
				Check heat exchanger
				Removing and installing rear duct
				Removal and installation of the air conditioning system compressor
				Dismantling and assembling freewheel
				Adjusting freewheel
				Checking freewheel
				Removal and installation of the capacitor
				Check capacitor
				Removal and installation of refrigerant lines (LF)
			Tables

printable version

Adjusting freewheel

Fig. 8.73. Measurement circumferential gap between the pressure plate and the compressor pulley

Measure the circumference of the gap between the pressure plate and the pulley of the compressor air conditioning systems using a thickness gauge (Fig. 8.73).

Make sure that the gap is correct.

Fig. 8.74. Installing a new gasket between the pressure plate and the compressor pulley

If not, remove the pressure plate and adjust the clearance selection laying 0.2-0.5 mm or more spacers (Fig. 8.74).

« previos page
Remove the bolts freewheel

next page »
Checking freewheel