Function pause between turns wiper

Use the control system of the windshield wiper, taking into account the speed of the car, then there is a pause between turns wiper is automatically adjusted depending on the speed of the car. This system reduces the need to adjust the parameters of the discontinuous mode of operation.

Wiper.

When the wiper switch is set to INT, the relay intermittent wiper, and an electric current is applied to the windshield wiper motor that runs at low speed.

Depending on the vehicle speed signal coming from the anti-lock brake system (DSC) HU / CM, relays intermittent wiper operates as follows:

a) when the vehicle speed 0 km / h:

- The maximum length of the pause between work passes with 11.6;

- The minimum duration of pauses between work passes 4.2 seconds;

b) when the vehicle speed of 30 km / h or more:

- The maximum length of the pause between work passes 9.6 seconds;

- The minimum duration of pauses between work passes 1.1 s.