 printable version
Removal and installation of the fuel injector
Withdrawal Remove the battery cover. Disconnect the negative battery cable. Remove the air filter. Disconnect the fuel injector connector. Remove the quick connector. Remove the fuel rail.
| Fig. 2.324. The fuel injector and fuel distributor: 1 - quick connector; 2 - the fuel distributor; 3 - Clip the fuel injector; 4 - the fuel injector; 5 - insulator
|
ATTENTION If the flange of the fuel injector or the fuel distributor element with a coating is damaged, it can cause fuel leakage. To prevent damage to remove the fuel injector clamp carefully (Fig. 2.325). |
Using strain clamp the fuel injector can cause improper installation of the fuel injector and fuel leakage. After removing the fuel injector replace the new clip.
| Fig. 2.326. The first step of removing the clamp fuel forunki
|
Peel one side of the clamping flange from the fuel injector fuel injector (Fig. 2.326).
| Fig. 2.327. The second stage of removing the clamp fuel forunki
|
Hold removed during the first operation side clamp the fuel injector to prevent it re-locks into place, remove the other side of the clamp the fuel injector (Fig. 2.327).
| Fig. 2.328. The final removal of the clamp fuel forunki
|
Remove the fuel injector clip by sliding it in the axial direction (Fig. 2.328).
| 
