REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 3 (2003 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mazda
	3
		Operation and maintenance of car
		Engine
			General description new engines models L8, LF, L3
			The mechanical part of engines
			Appendix 1
			Annex 2
			Appendix 3
			Engine Z6 - mechanical part
			Lubrication system
			Cooling system
			Intake system
			Fuel system
			Exhaust and Emission
			Ignition system
			Control system
			Tables
				Table 2.1 Technical specifications Engine
				Table 2.2 Types of loose leaves of radical bearings, mm
				Table 2.3 Characteristics of the pistons
				Table 2.4 Types of inserts connecting rod bearings (mm)
				Table 2.5 Characteristics of the drive belt
				Table 2.6 Characteristics of the camshaft
				Table 2.7 Characteristics of the drive sprocket timing
				Table 2.8 Characteristics of the oil pump drive sprocket
				Table 2.9 Characteristics of the timing chain drive
				Table 2.10 Characteristics of valves
				Table 2.11 Specifications of the valve tappet
				Table 2.12 Elements and their functions
				Table 2.13 Specifications lubrication system
				Table 2.14 Recommended engine oil
				Table 2.15 Specifications of the oil pump
				Table 2.16 Specifications of the oil filter
				Table 2.17 Specifications of the cooling system
				Table 2.18 Specifications of the cooling fan, fan motor
				Table 2.19 Specifications of the fuel system
				Table 2.20 Specifications of the intake system
				Table 2.21 Electrical Specifications Engine
				Table 2.22 Pin assignment
				Table 2.23 Shims balancing block engines with the established mechanism of the variable valve timing
				Table 2.24 Specifications of the mechanical part of engines of models L8, LF, L3
				Table 2.25 Oil filling volume (approximate number), L
				Table 2.26 Target engine speed
				Table 2.27 Condition off the air conditioning system
				Table 2.28 Control electric fan motors L8, LF (hot region) and L3 engine
				Table 2.29 Monitoring System
				Table 2.30 Diagnostic codes related to emissions (diagnostic code) mode (03)
				Table 2.31 Sending periodic diagnostic results monitoring system (Mode 06)
				Table 2.32 Specifications Engine Z6
				Table 2.33 Recommended engine oil
				Table 2.34 Concentration of antifreeze
		Transmission
		Chassis
		Steering Gear
		Brakes
		Onboard electric
		Body

printable version

Table 2.32 Specifications Engine Z6

* 1 The generator generates a current value.

* 2 Refrigerant pressure switch (middle) is turned off.

* 3 Refrigerant pressure (low) enabled.

* 4 The leakage current - continuous current (for audioblka, hours block PCM, etc.) when the ignition switch is in the off position, and the ignition key removed from the ignition.

* 5 For a hot area.

* 6 The lower limit must be greater than 0 A.

* 7 Turn the following electrical consumers and make sure that the tension is growing:

- Headlights;

- Electric fan heater;

- Rear window heater.

« previos page
Table 2.31 Sending periodic diagnostic results monitoring system (Mode 06)

next page »
Table 2.33 Recommended engine oil