printable version
Removal and installation of the oil pump motor M 102
| The cut of the oil pump motor M102 |
Withdrawal The oil pump can be removed on the car after removing the timing cover. Lubrication of the intermediate shaft
| - Disconnect the pump cover maslozabornuyu pipe.
- Remove the oil pump cover.
- Remove the oil pump gear.
- Check the condition of the gear, put them back on and check the clearances.
- With a tight rotation of the gear clearance limits are exceeded, and if damaged, replace the entire set of gear pinions.
|
|
Setting At installation replace all gaskets and note the position of the suction pipe laying and Tightening the hub of the crankshaft pulley. Pour the engine oil.  | Asterisk oil pump drive can be installed in only one position. Install the oil pump is carried out in reverse order. |
| Installation of the oil pump sprocket (the arrows show the convex portion to be directed to an oil pump) |
|