printable version

Clutch

Details of the drive clutch

1 - spring 2 - Dishes	3 - eccentric bolt

Removing and installing clutch slave cylinder

Withdrawal

PERFORMANCE ORDER

Put the car on a lift. Remove the slave cylinder supply hose. Stop the fitting hole of the working cylinder and the hose. Remove the bolts from the slave cylinder to the transmission. Remove the slave cylinder, remove the plunger and the gasket.

Setting

Installation of the clutch slave cylinder

1 - the working cylinder 2 - a lining	3 - the bolt 4 - Transmission

Installation of the working cylinder is made in reverse order, with the following:

PERFORMANCE ORDER

Place the gasket groove in the side of the gearbox. Insert the plunger into the base plate of the clutch fork. After attaching the hose to the slave cylinder bleed the clutch and check clutch pedal all the way.