 printable version
Removing and installing windscreen wiper drive
| - Remove the wiper arms.
- Remove the plastic grille air intake heater.
|
|
To this end, a thin screwdriver to press the central pin, remove the latch and slide the front grille. Remove the cap and nut, depending on the configuration. | - Remove the screws, push the pin in the center latch and remove the central panel.
- Remove the traction drive with a crank drive.
- Depending on the configuration, remove the drain tube from the roller.
- Disconnect the negative battery terminal.
- Unplug the multi-connector drive, through the engine compartment.
- Disconnect the wiring connector, unscrew bolts (three bolts) and remove the drive from the central bracket.
- Install in reverse order of removal.
|
|
|
