 printable version
Rear light
| Fig. 9.15. Details rear light: 1 - diffuser; 2 - gasket; 3 - Reversing light bulb, 21 W; 4 - Indicator lamp, 21 W; 5 - housing with bulb holder; 6 - marker light bulb; 7 - lamp stoplight, 21 W; 8 - a nut, M5
|
To remove the rear lights must be removed from inside the luggage compartment light clusters with plastic cover (if available) to access the rear of the unit. After that, disconnect the wiring connector on the rear side of the housing 5 (see. Fig. 9.15) with the bulb holder, turn the nut unit and remove the rear light unit with rubber gasket 2. If the gasket is damaged or signs of deterioration, replace it . To replace the lamp, release the tabs and lift the lamp housing on the rear side of the unit lights. You can then replace the appropriate bulb. All lamps are installed in the bayonet-type cartridges.
NOTE Locating pins on lamps stoplight and rear position lamps are offset to prevent improper installation. |
Installation is in the reverse order of removal. Thus watch reliability of fixing the lamp clip fasteners and tightening the screws.
| 
