REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Golf IV (1997 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Volkswagen
	Golf 4
		Instructions
		Engine
		Cooling system
		Fuel System
			Cars with petrol engines
			Cars with diesel engines
				Direct fuel injection
				Fuel tank
				Technical data
				Checking the system of preliminary heating of the diesel engine
				Check glow plugs
				Removing and installing glow
				The system of heating fuel
				Fuel injectors
					Refitting
				The moment of injection of high pressure fuel pump
				The basic malfunctions of the engine management system
		Exhaust system
		Ventilation and heating system
		Coupling
		Transmission
		Suspension brackets and power shafts
		Steering
		Wheels and tires
		Brakes
		Body
		Electrical equipment and wiring

Refitting

A warning

When using fuel injectors, observe cleanliness.

Withdrawal

PERFORMANCE ORDER

1. Clean the area around the fuel injectors and fuel lines connecting nuts.
	2. Unscrew connecting nuts and remove the high pressure in the set.
3. Unscrew holders of fuel injectors and remove the fuel injectors from the engine.
	4. To remove the fuel injector can be used inertial mallet or a special tool VW3364.
5. Remove the Heat protective O-ring.

Setting

PERFORMANCE ORDER

	1. When installing the fuel injectors need to use the new Heat protective O-ring. The ring must be installed so that the tapered side facing up (arrow shows the direction of the cylinder head).
2. Install the fuel injectors.
3. Attach the fuel injector, thus be correctly positioned on the support bracket.
4. Screw in a bolt with a spherical washer and tighten to 2 Nm.
	5. Install the high-pressure fuel lines and screw coupling nut, having tightened their moment of 25 Nm.

« previos page
Fuel injectors