 printable version
The side mirrors
NOTE Details mirrors from different manufacturers not necessarily interchangeable. |
| Fig. 16.32. Details of the side mirrors with manual adjustment: 1 - the screw fastening drive control; 2 - wheel drive control (only for mirrors with manual adjustment); 3 - mirror (snap set); 4 - the case; 5 - the bolts of the housing; 6 - Panel
|
In Fig. 16.32 show details of the side mirrors with manual adjustment. Power Mirrors has a similar device. Instead of a manual drive and cables are provided in the drive wiring and the switch mounted on the door panel. Removal in the following order: - Remove the triangular patch 6 from the inside of the door; - On mirrors electrically disconnect the electrical connector; - Unscrew the mounting 5 and remove the case 4 with a mirror 3 with the door; - Cover the upper and lower edge of the mirror housing with adhesive tape to protect from damage; - Holding the bottom, remove the mirror from the body; - Holding the mirror, disconnect the wiring connector (if available). Installation spend to sequences, return to removal. When assembling the mirror set the alignment pins in the place, and press it into the housing. When installing a new mirror to ensure suitability for mounting on a car. Check mirrors.
| 
