Podemnosdvizhnaya panel sunroof

Operating principle

All functions of the opening and closing up-and-sliding sunroof with the glass panel when the ignition is performed.

After turning off the ignition hatch can be managed as long as there is no open front left or right front door.

The rotary switch is preset longitudinal 2 and 3 vertical position of the hatch opening glass panel (Fig. 1.21).

On the rotary switch marked mark denoting a given shift and the rise of the glass panel door.

Opening of lifting and sliding sunroof in the so-called comfort position 1 provides maximum protection from extraneous noise that can occur when the fully open hatch in the switch 2.

Switch automatic pre-selection

Lifting sunroof is equipped with force limiters at closing. When a collision with an obstacle during the opening or closing of the position shift or lift the glass panel moves in the opposite direction.

In addition, the hatch is equipped with the emergency closing. In case of problems with the closing of the hatch with a glass panel can be forced to shut down by pressing the switch, which for this purpose should be in position ?�Schiebedach geschlossen / hatch is closed." 4

When the emergency hatch closing force limiter is switched off.

Drive lifting and sliding roof with a glass panel is protected from overheating, stop working time. The defense mechanism is activated after about 2 minutes of continuous use the drive hatch. After the cooling phase, the drive of the hatch is turned back on.

In the absence of on-board voltage of lifting and sliding roof can be opened or closed a standard hex wrench "4".