 printable version
Seat adjustment
Seat adjustment in the longitudinal direction
Pull the handle upwards and slide the seat. Then release the knob and the seat a little push to trip the lock (Fig. 1.51).
ATTENTION For safety reasons, it is necessary to make adjustment of the driver's seat in the longitudinal direction only the vehicle is stationary. |
Adjust the overpressure in the lumbar region By rotating the hand wheel of the seat back in the lumbar region is more or less curved. In this way, should be to find the most favorable position to support the spine, thus avoiding fatigue on long journeys.
To tilt the seatback Lean from the back and turn the knob.
ATTENTION The backrest is in motion must not be tilted too far back, as it significantly reduces the effectiveness of seat belts. |
Seat height adjustment "Tickler" up and down movement of the handle on the outside of the seat seat raise or lower. Rise: lever from the initial position to pull up and make a "booster" of the movement. Lowering: handle from its original position, press down and make a "booster" of the movement.
| 
