printable version
Removing and installing ignition coils with output stages
| Fig. 2.249. The components of the spark plug 1 - knock sensor 1; 2 - the gauge of a detonation 2; 3 - ignition coil with output stage; 4 - spark plug, 25 Nm; 5 - a bolt 20 Nm; 6 - a bolt 10 Nm; 7 - Hall sensor; 8 - O-ring
|
Removing ignition coils with output stages
To remove the ignition coils with output stages from spark plugs put a stripper at the upper edges of the thick coil (Fig. 2.250).
NOTE Observe security measures. |
If removal pry the puller for the lower edges of the coil can be damaged.
With the help of a stripper remove the ignition coil approximately 30 mm from the spark plug (Fig. 2.251).
Unlock and remove the plugs at the same time all the plugs to ignition coil (Fig. 2.252).
Install ignition coils with output stages Insert the ignition coil candles in jack with no effort. Align the ignition coil with respect to the plug and simultaneously connect all of the plugs to the coils. Evenly push the ignition coil by hand on the spark plugs.
|