 printable version
Check clutch
Watch out for the brake fluid level in the reservoir. At the same time, keep in mind that the hydraulic clutch has its own tank Visual inspection for leaks: - The master cylinder, slave cylinder, pipe, hose pipe, the water inlet hose connection (plug and screw) in all, including hidden places. Signs of external leakage, among others, are the traces of leaks, for example, insulation of a gearbox. Check piping-hose highways (check the fasteners highways). Hose pipe-pipe must not be kinked or pinched. Returned pedal should not interfere with the shifting or additional mats. Press the pedal. Thus the entire pedal travel is 5 different locations hold approximately pedal 20 (check the hydraulic system at different pressures). This assistant should check for leaks in the area specified in paragraph 2. Remove the slave cylinder sleeve and check for resistance to brake fluid. If the check on all points has not identified problems and have an opinion on paragraph 6, replace the slave cylinder.
NOTE In gearboxes where the working cylinder is designed as a single unit with the release bearing, the gearbox must be removed. |
| 
