add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Passat B6 (from the year 2004)
general info. full specifications. diagnostics. hints. tips. tricks
 Volkswagen Passat B6
Home
 
Volkswagen
Passat B6
Operation and maintenance of car
Engine
Overview
Mechanical (engine capacity of 1.6 liters)
Lubrication system
Cooling system
Fuel Injection System
The mechanical part (petrol engines of 2.0 liters)
Lubrication system
System ohlazhdeiya
Check cooling system for leaks
Drain coolant
Gulf Coolant
Removal and installation of the water pump
Removing and installing coolant pipe
Cooling system-controlled characteristic (engines with code letter BLX, BLY, BLR)
Removing and installing thermostat engine cooling system according to the algorithm
Removing and installing radiator fan and radiator fan 2 V177
Removal and radiator utanovka
Fuel system
Injection system
System of release of gases otrabotavschih
Ignition system
The mechanical part (diesel engines of 2.0 liters)
Lubrication system
Cooling system
Fuel system
Turbocharging turbo running on exhaust
The direct injection diesel
Exhaust
Tables
Transmission
Chassis
Steering Gear
Brakes
Onboard electric
Body
diagrams
 


Hit Counter by Digits


print page printable version

Removing and installing coolant pipe



Dismantling
Remove the suction tube.

Plug and bolts Oprah intake manifold
Fig. 2.190. Plug and bolts Oprah intake manifold


Remove the plug 1 of the attachment and release the cable (Fig. 2.190).
Turn off all electric wires from the support of an inlet collector.
Remove the screws 2-4 and remove the intake manifold support.
Disconnect the water hose from the coolant pipe.

Water hose and bolts of the tube cooling water
Fig. 2.191. Water hose and bolts of the tube cooling water


Disconnect the water hose 1 from coolant pipe (Fig. 2.191).
Remove the screws 2-3 and remove the tube.

Installation
Install in reverse order, with the following should be considered.
Gaskets and O-rings should be replaced.
All hose connections must be secured with standard clamps, the appropriate model year.




« previos page
Removal and installation of the water pump		 next page »
Cooling system-controlled characteristic (engines with code letter BLX, BLY, BLR)

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.