| 1. Preheat the box to operating temperature. The oil temperature should be about 60 ?� C. This temperature can reach 10 kilometers. |
| 2. Set the machine unloaded on a flat surface. |
| 3. Set the select lever to position "P", apply the parking brake. |
| 4. During the test the engine must be idling. |
 | 5. Probe for checking the oil level is in the hood. This also fueled oil ATF (Automatic Transmission Fluid). Remove the dipstick and wipe it with a clean, lint-free cloth, better skin. Then insert the dipstick all the way, again, take out and look at the oil level. The level of oil box of warm (60 ?� C) must be between the "min" and "max" of the probe. |
| 6. Check the appearance and smell of old oil on the dipstick. Attrition burnt smell burnt. Dirty oil can cause disturbances in the transmission. |
| 7. If necessary, add oil ATF. Use only approved for pouring plant oil ATF. As a rule, allowed the oil Automatic-Transmission, marked "Dexron". All restricted ATF oil may be mixed with each other. Do not use additives. |
A warning  Do not pour too much oil. A large amount can cause a malfunction of an automatic transmission. In any case, excess oil must be drained or removed.
|
| 8. After checking the oil level or adjustment, reinsert the dipstick all the way. |
9. Squeeze the foot brake and slowly popereklyuchat all transmissions. Then re-check the oil level. |
