printable version
Visual inspection of all safety belts
A warning Noises torsional belt due to technical factors. With strong noise only replace the belt. In no case do not apply to reduce noise oil or grease. Automatic not be disassembled, as this pops up tension spring. Traumatic!
PERFORMANCE ORDER | 1. Pull the belt through and check the status of the fiber. They can be broken. In this case, replace the belt. | 2. If there is rubbing without dropping fibers, the belt can not be replaced. | 3. Belt with heavy swing check for twisting, if necessary, remove the trim on the middle rack. | 4. Safety belts cleaned only with soap and water. In no case do not use solvents or chemical cleaners. |
|
|