 printable version
Programming and activation-time P
You can program the three time values, one of which is activated. Setting the time proceed as follows: - Click on the button to select programs. On-lit display 10 to appear: - Number of the program and has already been programmed on-time, or an empty field (- - -) to set the time; - Set for 10 seconds ON time by pressing the "Forward / Reverse". - To select the heating or ventilation Press the button. Time switching program the following numbers can be programmed after pressing the program selection. Change the number should be within 10 seconds.
NOTE After programming the displays activated on time. The selected time off after 10 seconds. The display remains lit and indicates the number of activated program. |
Output activated-time P Press the program button until the desired program number. Number of activated programs and display lighting switched off after 10 seconds. The programmed switching time is saved for the next activation. Set time activation program P Press the program button for 10 seconds until the displayed until the desired program number with the corresponding turn-on time. The selected time is switched off 10 seconds after activation. The display is illuminated and shows the number of activated program.  Installation time heating or ventilation Simultaneously pressing the time setting is displayed during heating or ventilation. Time of heating or ventilation can be set in the range of 30 to 60 minutes in increments of 5 minutes. The selected time is switched off 10 seconds after activation.
NOTE Longer heating or ventilation leads to increased power consumption from the battery. |
| 
