Exhaust

In order to facilitate the next repair unscrewing nuts and bolts that secure the system, lubricate them with high temperature grease Liqui Moly LM-508-ASC.

Before re-installing the exhaust system components, clean them with sandpaper the connection from the remnants of sealant and rust.

Connecting element in front of the exhaust pipe should not be bent more than 10 ?�, since otherwise it may be damaged.

Rear and center mufflers are designed as a single block, but each of them can be replaced individually.

Nuts of fastening clamps tighten evenly until 40 Nm.

When connecting a reception exhaust pipe to a central muffler clamp set, positioning it so that the bottom edge of the clamp bolts located at the level of exhaust pipe (Fig. 5.30).