 printable version
Vehicles with four-cylinder engines V5
Remove the four screws and remove the engine cover. Switch off the ignition and turn on the cylinder head wire connection with "weight".
| Fig. 2.7. Location nuts switch electrical connector terminals and high-voltage wires on spark ignition four-cylinder V5
|
Remove the nuts of the switch and unplug the electrical connector (Fig. 2.7). Remove the tips of high-voltage wires from spark plugs and the switch (see. Fig. 2.7). Clean spark a brush or with compressed air to prevent dirt from entering the engine cylinders after removing spark plugs. Remove the spark plug wrench 3122 B. Screw in new spark plugs and tighten them to a torque of 30 Nm. Connect the spark plugs high-voltage wires. Set the switch and secure it with nuts, having tightened their moment of 10 Nm.
| 
