printable version
Replacing the battery terminals
You will need a key "10".
A WARNING Make sure the ignition is turned off. |
| | 1. Remove the wire nut ... | 2. ... and disconnect the wire from the tip. |
3. Loosen the pinch bolt nut ... | | 4. ... and remove the cap from the battery terminals. | 5. Similarly, replace the tip of the second wire to the second battery terminal. |
6. Install the parts in reverse order of removal. After installation, put on the metal end of wires and exposed surfaces of the battery terminals a thin layer of petroleum jelly, grease, Lithol-24 or similar (most preferably copper-bearing conductive grease).
|