REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Chevrolet Lanos (since 2004 of release), Daewoo Lanos (since 1997 of release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Chevrolet
	Lanos
		Device Car
		Operating Guidelines
		Faults in the way
		Maintenance
		Engine
		Transmission
		Chassis
		A steering
		The brake system
		Electrical
			Design Features
			Mounting blocks
			Accumulator battery
			Generator
			Starter
			The switch (lock) of ignition
			The engine management system
			Lighting, light and sound alarm
			Replacing windscreen wiper motor-reducer
			Removal and installation of a washer of glass of a wind window
			Removal and installation of the electric motor of the basic fan cooling radiator
			Removal and installation of the electric motor of the additional fan cooling radiator
			Heated tailgate window glass
			Removing and installing cigarette lighter holder
			Device combination
				Design Features
				Possible malfunctions of the instrument cluster, their causes and remedies
				Removal and installation of the instrument cluster
				Replacing control lamps and instrument lighting
				Replacement devices
			Switches dashboard
			Replacing the control unit power windows
			Car audio system
			Replacement sensors and switches
		Body
		Wheels and tires
		Purchase of spare parts
		A trip to the STO
		Winter car operation
		Preparation for technical inspection
		Tips novice mechanic
		Applications
		Diagrams

Removal and installation of the instrument cluster

You will need a Phillips screwdriver with a blade.

1. Disconnect a wire from the plug "minus" of the storage battery.


2. Remove the control unit with heating and air-conditioning (see. "Removing and installing control unit with heating and air conditioning"), without disconnecting from it pads harness; Lower down a bit, to get access to the screws fixing the instrument panel trim ...	3. ... and remove the screws.

4. Remove regulator electroproof headlights (see. "Replacing the regulator electroproof headlights") ...


5. ... and turn him located the two screws securing the lining.	6. Remove the two screws securing the liner above the instrument cluster ...


7. ... take away the lining of the instrument panel ...	... 8. Disconnect the wiring harness from the switch and remove the dashboard trim.


9. Remove the four screws fixing the instrument cluster ...	10. ... Take it from the dashboard, disconnect the three pads harness and remove the instrument cluster with the car.

11. Install the parts in reverse order of removal.