printable version
Replacement of the contact group switch (lock) of ignition
You will need a Phillips screwdriver with a blade. 1. Disconnect a wire from the plug "minus" of the storage battery. | | | 3. Remove the top two ... |
| | 4. ... and the bottom three screws that secure the column cover. | 5. Remove the top ... |
| | 6. ... and lower portions of the column cover. | 7. Press the lock ... |
| | 8. ... and Disconnect harness connector from the contact group. | 9. Remove the screw fastening ... |
10. ... and remove the contact group ignition. 11. Install the parts in reverse order of removal.
|