 | 1. Remove the handle bracket window and remove the handle. The bracket is released, if you insert a clean cloth between the handle and the door trim and stretching the fabric opposite ends of the bracket, hook clamp and release it. It is necessary to pull the handle to release it after the staples removed from the spline shaft window. |
 | 2. Remove the screw fastening of the internal handle, press the knob in the direction of the door hinge and remove it from the door trim. |
 | 3. Remove the inner cover and the outside rearview mirror. |
 | 4. Remove the screws that secure the door trim. |
 | 5. Insert the removal tool between the door trim and door trim door and release the caps. Disconnect the electrical connectors. |
 | 6. Remove the door trim and lower the glass. |
 | 7. Remove the three screws and remove the speaker from the front door. |
 | 8. Remove the glass window. |
 | 9. Remove the outer band with a moisture proof doors. |
 | 10. Remove the screws and remove the windows. |
 | 11. Remove directing glass door. |
 | 12. Remove thrust actuator and lock on the outside door handle. |
| 13. Remove the door latch, the modulator and the outside door handle. |
 | 14. Install in the reverse order of removal. |
Attach the sealing tape to the edges of the wing, located opposite the door hinges. 
