REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Accent (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Hyundai
	Accent
		Instructions
		Engine
		Greasing system
		Cooling
		Control, reduced toxicity
		Fuel system
		Ignition system
			Technical data
			The ignition system of engine DOHC
			Check the ignition coil
			Check spark plugs
			Control of spark plugs
			Check spark plugs
			Checking high-voltage wires
			Ignition coils
			Installation of high-voltage wires
			Troubleshooting
			Egnition lock
		Coupling
		Transmission
		Axes and power shafts
		Suspension
		Steering
		Brakes
		Body
		Air
		Electrical equipment
		Appendix
		Wiring

printable version

Check spark plugs

Connect to a high-voltage spark plug wire. Hold the spark plug special pliers with insulated handles, connect the frame of the vehicle with a mass of candles.

A warning

Do not touch the body of the car during the following operations.

The assistant should crank the engine starter, and the spark between the electrodes should be observed sustained strong spark.

If there is no spark or weak spark, check the condition and correct the following defects:

- The presence of soot and clean or replace the spark plug;
- When oil contamination clean or replace the spark plug;
- When worn or burnout, replace the spark plug electrodes;
- The destruction of the ceramic insulator, replace the spark plug;
- Ring is damaged, replace the spark plug spark plug;
- In violation of the electrode gap in the spark plug, adjust gap.

« previos page
Control of spark plugs

next page »
Checking high-voltage wires