REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Elantra (from 2000 to 2004, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Hyundai
	Elantra
		Gasoline engines 1.6, 1.8 and 2.0 liters
		The diesel engine of 2.0 liters
		Greasing system
		Cooling
		Fuel system
		Control systems and emission control
		Ignition system
		The system of preliminary heating of the diesel engine
		Coupling
		Manual transmission
			Technical data
			Checking the oil level
			Changing the transmission oil
			Replacement of an oil sealing ring of a power shaft
			Removing and installing transmission
			The gear change mechanism
			Troubleshooting
		Automatic Transmission
		Drive shafts, front and rear axles
		Suspension
		Steering
		Brakes
		Body
		The air conditioning system
		Electrical equipment
		Electrical diagrams

printable version

Changing the transmission oil

Recommended gear oil: SAE 75W / 90 (API GL-4).

When replacing the gearbox oil the car should be in a horizontal position.

PERFORMANCE ORDER

Remove the drain plug and drain into a suitable container gear oil from the gearbox.

Install a new washer on the plug and replace the oil drain plug in place. Torque: 30-35 N ??? m.

Fill the gearbox the required amount of oil required, so that the oil level is 5-9 mm below the hole for the oil filler plug.
Oil volume: 2.15 l.
Torque: 30-35 N ??? m.

« previos page
Checking the oil level

next page »
Replacement of an oil sealing ring of a power shaft