printable version

Workplace Equipments

Talking about the instrument, one can not forget about the equipment of the workplace. If you have to conduct more serious work, than simple maintenance, you should take care of the preparation of a suitable working platform.

We must acknowledge that many motorists are compelled to make the removal of the engine and other similar works far not in a garage or workshop. However, in any case, an important requirement is that the roof or tent.

If possible, any procedures on dismantling of parts of the car's systems should be made on a clean, flat bench or sturdy table convenient height. Workbench must be equipped with a vise. Sufficient is the presence of a vice with disclosing of sponges to 100 mm and with soft overlays on sponges.

As mentioned above, on the job site must be equipped with a clean, dry place to store tools, lubricants and cleaning fluids, putty, paints, etc.

It should be noted that absolutely necessary tool is electric, therefore the platform must be equipped with a power supply for its connection. The presence of a drill with a cartridge to 9.5 mm and a set of qualitative drills appreciably will facilitate carrying out of many procedures.

Finally, the workplace must always have an adequate supply of old newspapers and pure, not vorsyascheysya cloth designed for cleaning the work area, tools and car parts.

Refinement should take to recycling centers in sealed containers.

Never perform any work on the naked painted surface of the car, use protective overlays on wings, or, at worst, cover the polished surfaces with old blankets.