REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Magentis / Optima (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Magentis
		Engines
		Lubrication System
		Cooling system
		The control and toxicity
		Fuel system
		Ignition system
		Coupling
		Transmission
		Power shafts, axles
		Suspension
		Steering
		Brakes
			Technical data
			Anti-lock brakes
			Checking and adjusting the brake pedal position
			Check the brake servo
			Bleeding the hydraulic system of a drive of brakes
			Bleeding the hydraulic system of a drive of brakes with scanner use
			Adjust the parking brake stroke
			Brake pedal
			The main brake cylinder
			Vacuum brake booster
			Brake tubes and hoses
			Pressure regulator
			Replacing the front brake pads
			Caliper front brake
			Rear drum brakes
			Replacing the working brake cylinder
			Rear disc brakes
			Saddle
			Hydraulic block HECU (the hydraulic and electronic control unit)
			Wheel speed sensor
			Parking brake
			Troubleshooting
		Body
		The air conditioning system
		Electrical equipment
		Electrical diagrams

Hydraulic block HECU (the hydraulic and electronic control unit)

Withdrawal

PERFORMANCE ORDER

1. Disconnect the unit from the HECU.

2. Disconnect the unit from the HECU brake tubes.

3. Remove the bracket bolts and remove the block HECU with bracket.

Do not disassemble the hydraulic block HECU.
HECU transportation unit should be carried out in a vertical position with the holes block closed with suitable plugs, as brake fluid should not be merged with the unit.

Setting

PERFORMANCE ORDER

1. Installation is spent to sequences, return to removal.
2. Tighten the bolts and nuts of the modulator brake pipe required torques.

Tightening torques:

« previos page
Saddle