 printable version
Pipes and hoses, engine cooling
Tubes and pipes of the cooling system of engine DOHC Check | Check the pipes and hoses of the cooling system for damage, cracks and swellings. If necessary, replace them.
|
|
Setting |  | When attaching the hose to the nozzle exit coolant pre-lubricate the O-ring and union coolant. |  | - Do not use oil or grease to lubricate the O-ring and socket.
- Before installing the hose fittings clean from dirt, dust and sand.
- Insert the coolant tube until it stops.
- When installing, only use a new sealing ring.
|
|
|
|
Tubes and pipes of the cooling system of the engine V 6 Check | Check the pipes and hoses of the cooling system for damage, cracks and swellings. If necessary, replace them.
|
|
Setting |  | When attaching the hose to the nozzle exit coolant pre-lubricate the O-ring and union coolant. | | - Do not use oil or grease to lubricate the O-ring and socket.
- Before installing the hose fittings clean from dirt, dust and sand.
- Insert the coolant tube until it stops.
- When installing, only use a new sealing ring.
|
|
|
|
|
