printable version

Wiper blades

It was found that the effect of the technical hot wax that are used in automatic machines for washing cars, leads to difficulties in cleaning the windshield.

Contamination of the windshield or the wiper blades with foreign matter can reduce the effectiveness of the windshield wiper. Common sources of contamination are insects, tree sap, and traces of care with the help of technical glass of hot wax used in some car wash. If brushes clean bad, clean both brushes and high-quality glass cleaner or mild detergent and rinse thoroughly with clean water.

To prevent damage to the brush wipers, do not use for the cleaning of gasoline, kerosene, solvents or other means.

To prevent damage to the wiper arms or other components, do not attempt to move the wipers manually.

PERFORMANCE ORDER

1. Raise the wiper arm and turn the wiper blade assembly so as to provide access to the plastic clamp the closing. Click on the clip and slide the brush assembly toward the windshield, then pull it completely out of the shoulder. 2. Firmly grasp the end of the rubber brush and pull it toward you until the tabs are free of the metal support. 3. Remove the metal brackets with a rubber brush and install a new rubber brush. A warning Do not bend the metal holders. 4. Gently slide the new rubber brush and make installation of the brush in the reverse order of removal. Place the brush so that ears were sent to the bottom of the wiper arm.