 printable version
Adjusting the front seats
To ensure the most comfortable fit people of different height and build seating position of the driver and front passenger can be changed in the longitudinal direction and the angle of the backrest. Furthermore, you can adjust headrest height.
A WARNING Adjust the position of the driver's seat only on the vehicle is stationary. If you try to adjust on the move, you clearly commit seat in the longitudinal direction, and suddenly it moves, you can lose control of the car. |
To adjust the position of the front seats in the longitudinal direction, pull up the locking lever and move the seat to slide into a comfortable position. After installing the seat and lower the lever by small movements of the seat back and forth Achieve its reliable fixation. To adjust the backrest, pull up the handle of the lever pivot and move the seat back in a comfortable position.
A WARNING In order to reduce the risk of injury in a collision or sudden braking of the car, the back seat while driving should be in a nearly vertical position. The effectiveness of safety belts could be significantly reduced if the seat back is tilted. In this case, there is a danger that the driver or passenger slip out from under the seat belt and get serious injury. |
The headrests of the front seats are height-adjustable. To move the head restraint downwards, press the tab and slide the headrest until it locks. To move the headrest upward push on the latch is not needed. The optimum position of the headrest - its upper edge is flush with the top of the head. NOTE For people who are very tall lift the headrest to its highest position for people of very low growth dip to its lowest position. |
If necessary (for example, folding seats in a sleeping position) the head restraint can be removed. NOTE Rear head restraints are similar in design to the front seat headrest. How to adjust the position of back the same as for the front seat headrests. |
| 
