REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Spectra (2004 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Spectra
		Device Car
		Operating Guidelines
		Faults in the way
		Maintenance
		Engine
			Design Features
			Possible engine malfunction, their causes and remedies
			Useful tips
			Compression check in cylinders
			Removal and installation of decorative engine cover
			Removal and installation of mudguards of the engine
			Mount Replacement power unit
			Replacement of a protective timber
			Installation of the piston of the first cylinder to TDC of the compression stroke
			Replacing the timing belt
			Replacing the support rollers and tensioning the timing belt
			Removing, Troubleshooting and installation of a flywheel
			Replacement parts Seal Engine
			The cylinder head of the engine
			Removing and installing engine
			Lubrication system
			Engine cooling system
			Exhaust System Engine
			The power supply system of the engine
		Transmission
		Chassis
		A steering
		The brake system
		Electrical
		Body
		Car Care
		Purchase of spare parts
		A trip to the STO
		Winter car operation
		Preparation for technical inspection
		Applications
		Diagrams

printable version

Mount Replacement power unit

To replace the back support of the power unit, you will need a socket wrench "17".

1. Remove the support bracket of the receiver (see. "Replacing gaskets intake manifold of the engine").

2. Poddomkratte motor or post it.


3. Remove the two screws on the lower back support to the gearbox.	4. Remove the mounting bolt to the support bracket on the body.


5. Remove the bolt of the top fastening of a support to the gearbox.	6. Bring a support arm on the back of ...


7. ... lift up support, expand its ...	8. ... Get lower edge of the support for the drive and remove the support from the car.

9. Install the rear suspension support of the power unit in the reverse order of removal.

To replace the front support of the power unit, you will need: two keys "17" socket wrench "14".

1. Poddomkratte motor or post it.


2. Remove the nut and remove the bolt to the support bracket on gearbox.	3. Remove the two nuts securing the support to the protective timber.


4. Remove the support from the bracket on the gearbox ...	5. ... and remove it from the vehicle.

6. Install the front support of the power unit in the reverse order, with the arrow on the support to be back.

To replace the left support of the power unit, you will need: a key "17" socket wrench "17".

1. Remove the air filter (see. "Removing and installing the air filter").

2. Poddomkratte motor or post it.


3. Loosen the screws on the left support of the power unit to the bracket on the back ...	4. ... and remove the bolt.


5. Remove the three nuts securing the support bracket to the gearbox ...	6. ... and remove the support from the car.

7. Replace the left support of the power unit in the reverse order of removal.

To replace the right support of the power unit, you will need: a key "17" socket wrench "17".

1. Remove the bolt of the right support to the bracket on the engine.

NOTE

For the convenience of work on the replacement of the right support of the power unit, remove the power steering reservoir, without disconnecting from it hoses.


2. Remove the two nuts securing the right support of the power unit to the bracket on the engine ...	3. ... and remove the support.

4. Install the right support of the power unit in the reverse order of removal.

« previos page
Removal and installation of mudguards of the engine

next page »
Replacement of a protective timber