 printable version
Removal and installation of the air filter
Air filter and a duct connected thereto is removed to gain access to other units in the engine compartment, and when they are damaged. You will need: the key "10" (convenient socket), Phillips screwdriver blade. | | 1. Remove the bolt and remove the nut on the air duct to the upper cross frame radiator ... | 2. ... loosen the air supply hose by unscrewing the bolt clamp ring, slide the clamp on a hose ... |
| | 3. ... and disconnect the hose from the pipe inlet silencer. | 4. In a similar manner, disconnect the air supply hose from the pipe of the air filter ... |
| | 5. ... and remove the duct. | 6. Loosen the air supply hose to the fitting of the air filter by removing the bolt clamp ring, slide the clamp on a hose ... |
| | 7. ... and disconnect the hose from the pipe of the air filter. | 8. Remove the mounting bolts of the air filter ... |
| 9. ... and remove the air filter. |
10. If necessary, remove the intake silencer. For this... |
| | 12. ... remove the bolt bracket silencer inlet to the body ... | 13. ... and remove the muffler by removing it from the arch of the left wheel. |
NOTE It looks like the intake silencer. |
| | 14. Remove the spacer sleeve ... | 15. ... and remove the mount muffler inlet of the bracket. If there are signs of aging cushion rubber, replace it. |
| | 16. Remove the two screws holding the nuts from turning ... | 17. ... and remove the bracket. |
18. Install the air filter and air duct in reverse order of removal. |
|
